Product Data Sheet Show all documents
Sikaplan® WP 1130-20 C

Sikaplan® WP 1130-20 C

Waterproofing Membrane

Sikaplan® WP 1130-20 C is a 80 mil (2.0 mm) thick sheet waterproofing membrane, based on polyvinylchloride with an integral fiberglass mat carrier sheet for dimensional stability. It is suitable for use in waterproofing of vertical and horizontal foundation applications and other below grade structures. The membrane contains a yellow signal layer with dark gray underside so that damages to the surface can be seen easier.

Sikaplan® WP 1130-20 C waterproofing membrane features:
  • High Tensile Strength and Elongation
  • Excellent Dimensional Stability
  • Specially Compounded for Sub-Grade Environments
  • Heat Welded Seams
  • Resistance to Varying Levels of Hydrostatic Pressure
  • Compatible with Sika® Greenstreak® Waterstops
Product Data Sheet Show all documents

Usage

Sikaplan® WP 1130-20 C is used for vertical and horizontal foundation applications, and other below grade structures requiring a waterproofing sheet membrane.  

Advantages

Sikaplan® WP 1130-20 C waterproofing membrane features:
  • High Tensile Strength and Elongation
  • Excellent Dimensional Stability
  • Specially Compounded for Sub-Grade Environments
  • Heat Welded Seams
  • Resistance to Varying Levels of Hydrostatic Pressure
  • Compatible with Sika® Greenstreak® Waterstops

Packaging

Sikaplan® WP 1130-20 C rolls are 6.56 ft. (2 m) wide x 49.2 ft. (15 m) long wrapped in a protective film and strapped to a wood pallet. Individual rolls weigh 171 lbs.

Product Details

Product Information

Shelf Life

n/a

Storage Conditions

Sikaplan® WP 1130-20 C membrane rolls should be stored in unopened, undamaged, original packaging, in a horizontal position, in dry conditions and at temperatures between 40 °F (5 °C) and 85 °F (30 °C). Sikaplan® rolls should be protected from direct sunlight, rain, snow and ice, etc. Do not stack pallets of the rolls on top of each other, or under pallets of any other materials during transport or storage.

Volatile organic compound (VOC) content

0 g/L

Overall Thickness

0.079 in. (2.0 mm)

(ASTM D-638)
Technical Information

Tensile Strength

1600 (11.1)

(ASTM D-638), min., psi (MPa)

Resistance to Static Puncture

Pass

(ASTM D-5602), 56 lbf (250 N)

Low Temperature Bend

Pass

(ASTM D-2136)

Resistance to Tearing (nail shank)

20 (88)

(ASTM D-1004), min., lbf (N)

Linear Dimensional Change

0.01%

(ASTM D-1204)

Weight Change after Immersion in Water

2.1%

(ASTM D-570)

Chemical Resistance

Contact Sika® Greenstreak® engineering department at 800-325-9504 for technical assistance with chemical resistance.

Resistance to Dynamic Puncture

Pass

(ASTM D-5635)

117.7 FT-PDL (5 J)

Seam Strength

90

(ASTM D-638)

(% of tensile strength)

 In the Seam Strength testing the observed failure occurs through a rupture of the membrane rather than a seam failure.

Thermal Ageing

95

(ASTM D-3045)

Elongation, min. (% of original)

95

(ASTM D-3045)

Tensile Strength, min. (% of original)

Documents