Product Data Sheet
Show all documents

SikaTard®-440

Hydration Controlling Admixture

SikaTard®-440 is a hydration controlling admixture to control the hydration of cement. The use of SikaTard®-440 allows the concrete producer to stabilize concrete mixes for long periods without negatively affecting concrete durability. SikaTard®-440 can also be used stabilize returned concrete and re-use it. SikaTard®-440 can also be used in concrete wash water application. SikaTard®-440 meets the requirements of ASTM C-494, Type B and Type D admixture.

  • Increases workable life of concrete up to several hours.
  • Allows controlled delay in set time.
  • Provides flexibility in planning and scheduling concrete pours.
  • Allows returned concrete to be re-used.
  • When used in wash water application, prevents concrete producers from having to clean the truck at the end of day’s work and saves water.
  • The effect of SikaTard®-440 in concrete can be negated by addition of appropriate accelerators, at any time.
Product Data Sheet
Show all documents

Usage

Typical Applications:
  • Transport freshly batched ready mix concrete for long distances.
  • For better control of concrete set time in hot and cold weather concreting applications.
  • Large concrete pours; to help prevent cold joints.
  • Pumping long distances
  • Low water cement ratio concrete, such as high strength or pervious concrete.
  • High early strength concrete for improvement of workable life without a detrimental effect on early strengths.
  • Utilize returned concrete and wash water applications.
  • Pervious concrete application.
  • Stabilize shotcrete mixes
  • Whenever controlled set time or cement hydration is required.
 

Advantages

  • Increases workable life of concrete up to several hours.
  • Allows controlled delay in set time.
  • Provides flexibility in planning and scheduling concrete pours.
  • Allows returned concrete to be re-used.
  • When used in wash water application, prevents concrete producers from having to clean the truck at the end of day’s work and saves water.
  • The effect of SikaTard®-440 in concrete can be negated by addition of appropriate accelerators, at any time.

Packaging

SikaTard®-440 is available in 55 gallon drums (208 liters), 275 gallon totes (1040 liters) and bulk delivery.

Color

Green Liquid

Product Details

Product Information

Shelf Life

Shelf life when stored in dry warehouse conditions between 50 °F and 80 °F (10–27 °C) is 1 year.

Protect from direct sun and freezing temperatures.

Storage Conditions

SikaTard®-440 should be stored at above 40 °F (5 °C). If frozen, thaw and agitate thoroughly to return to normal state.

Specific Gravity

Approx. 1.152

Application

Application Information

Mixing

Introduce SikaTard®-440 at a suitable time during the mixing process of concrete. Preliminary trials on site should be conducted to determine the required dosage rates. To optimize the stabilizing effect, after the addition of SikaTard®-440, Sika recommends that the combined materials be mixed for 80-100 revolutions, either in the concrete mixer or in the Ready-Mix truck.

  

Combination with Other Admixtures: SikaTard®-440 can be used in conjunction with all Sigunit® accelerators. SikaTard®-440 is also compatible with all other Sika admixtures.
Consumption

Recommended Dosage

Dosage rates will vary according to materials used, ambient conditions, and the requirements of a specific project. For normal applications, depending on retardation required, the dosage of SikaTard®-440 will vary from 2–8 fl.oz. per 100 lbs. (130–520 ml / 100 kg) of cementitious mass. For stabilization for longer periods the dosage can be increased up to 48 fl.oz. per 100 lbs. (3130 ml / 100 kg) of cementitious mass.
Concrete trial mixes must be conducted to determine the optimum dosage. For more information about the use of this product please contact the local Sika sales representative or the Technical Service Department at 1-800-933-7452.

Documents