Product Data Sheet
Show all documents

Sika® Film

Finishing Aid & Evaporation Control

Sika® Film retards moisture evaporation from the concrete surface and acts as a finishing aid for concrete flatwork.

  • Sika® Film eliminates the need to add water to low slump concrete, or sprinkle water on the concrete surface to aid in finishing.
  • When applied to fresh concrete Sika® Film is an excellent finishing aid for extra smooth and durable concrete floors.
  • Prevents plastic shrinkage cracking caused by evaporation in low humidity conditions such as heat and high winds.
  • Aids in finishing concrete that produces little or no bleed water, such as microsilica mixes or mixes with air entrainment.
Product Data Sheet
Show all documents

Usage

Sika® Film is recommended for use in all applications where a superior finish is required on concrete flatwork. Sika® Film protects concrete from the effects of excessive moisture loss in rapid drying conditions.  

Advantages

  • Sika® Film eliminates the need to add water to low slump concrete, or sprinkle water on the concrete surface to aid in finishing.
  • When applied to fresh concrete Sika® Film is an excellent finishing aid for extra smooth and durable concrete floors.
  • Prevents plastic shrinkage cracking caused by evaporation in low humidity conditions such as heat and high winds.
  • Aids in finishing concrete that produces little or no bleed water, such as microsilica mixes or mixes with air entrainment.

Packaging

Sika® Film is available in 5 gallons pails,  55 gallon drums and 275 gallon totes

Color

Orange liquid

Product Details

Product Information

Shelf Life

Shelf-life in original unopened packaging is two years when stored in dry warehouse conditions between 50°F and 80°F (10°C - 27°C).

Storage Conditions

Sika® Film should be stored at above 40°F (5°C).

Application

Consumption

Coverage

When diluted at a ratio of one to eight, one gallon of Sika® Film will yield nine gallons of sprayable material. The total diluted material will cover an area of approximately 1600 - 3200 ft2 (150 - 300 m2). Dosage rates outside the recommended range may be used when project conditions require special consideration. In this case please contact your local Sika® representative or Sika® technical service department at 1-800-933-7452 for further information.

 
Application steps

APPLICATION

Thoroughly mix one part Sika® Film with eight parts water by volume. Apply the  diluted Sika® Film solution with a fine mist sprayer as soon as possible after screeding. Use during and after bull floating and trowelling operations.

Documents