Product Data Sheet
Show all documents
SikaBond® T-53

SikaBond® T-53

SikaBond®-T53 is a one part, advanced polyurethane, elastomeric adhesive.

SikaBond®-T53 is a one-component, durable and flexible interior polyurethane adhesive.

  • Fast cure rate
  • High durability and flexible
Product Data Sheet
Show all documents

Usage

SikaBond®-T53 is designed for adhesion on all cement-based materials, brick, ceramics, and wood materials  

Advantages

  • Fast cure rate
  • High durability and flexible

Packaging

600 ml foil pack, 20 foil packs per box

Color

Beige

 

Product Details

Product Information

Chemical Base

Polyurethane

Shelf Life

SikaBond®-T53 has a shelf life of 12 months from the date of production, if it is stored properly in undamaged, original, sealed packaging, and if the storage conditions are met.

Storage Conditions

SikaBond®-T53 shall be stored in dry conditions, protected from direct sunlight and at temperatures between +41 °F and +77 °C.
Technical Information

Shore A Hardness

40 approx. (after 28 days) (73 °F (23 °C) and 50 % R.H.)

(ASTM D-2240)

Tensile Strength

261 psi approx. (73 °F (23 °C) and 50 % R.H.)

(ASTM D-412)

Shear Strength

 174 psi approx. (73 °F (23 °C) and 50 % R.H.)

(ASTM D-1002 modified, glass substrate)

Service Temperature

-40 °F to 158 °F

Application

Application Information

Sag Flow

No Sag - holds body after gunning

Ambient Air Temperature

+59 °F to +95 °F

Relative Air Humidity

40% to 70%

Curing Rate

1/8 inch (3.0 mm) in 24 hours at 73°F (23°C) and 50% RH.

Tack Free Time

45-60 minutes at 73°F (23°C) and 50% RH
Consumption

Coverage

20 oz (600 ml) Sausage: Yield in Linear feet

Width/Depth1/4''3/8''1/2''
1/4''48.1
3/8''32.121.4
1/2''24.116.012.0
3/4''16.010.78.0
1''6.0
1.25''4.8
1.5''4.0
Application steps

APPLICATION INSTRUCTIONS

For the application of SikaBond®-T53 all standard construction guidelines apply.

SUBSTRATE PREPARATION

  • Clean all surfaces. Surface must be sound, clean, dry, frost-free, and free of oil and grease. Curing compound
    residues and any other foreign matter must be thoroughly removed.
  • Substrates must be clean, dry, sound and homogeneous, free from oils, grease, dust and loose or friable particles. Paint, cement laitance and other poorly adhering contaminants must be removed.
  • Concrete and/or cement screeds must be ground and thoroughly cleaned with an industrial vacuum.
  • Anhydrite screeds, including flowable anhydrite screeds must be ground and thoroughly cleaned with an industrial vacuum shortly before bonding with the adhesive starts.
  • For other substrates contact our Technical Service Department for advice and assistance.

CLEANING OF TOOLS

Clean all tools and application equipment immediately after use with Sika® Remover-208 and/or Sika® TopClean T. Once cured, residual material can only be removed mechanically.

 

Documents