Product Data Sheet Safety Data Sheet Show all documents

Sarnafil® Decor Profile (US)

PVC extruded accessory

Sarnafil® Decor Profile (US) is a durable, PVC extruded accessory designed to emulate the appearance of a standing seam metal rib, with heat weldable flanges for securement onto a Sarnafil roof membrane.

  • Color match to Sarnafil roof membranes
  • Hot-Air weldable
 
Product Data Sheet Safety Data Sheet Show all documents

Usage

Used with Sarnafil roof membranes to create the appearance of a standing seam metal roof.    Areas of Application
  • Domed Roofs
  • Pitched Roofs
  • Flat Roofs
 

Advantages

  • Color match to Sarnafil roof membranes
  • Hot-Air weldable
 

Packaging

  • 25 Decor Profiles per tube
  • 30 rigid PVC connectors per tube
  • Tube Length: 10 ft 4'' (3.1 m)
  • Tube Weight: 57 lb (25.9 kg)

Colour

  • White, Tan, Reflective Gray, Patina Green, Copper Brown, Evergreen*, Lead Gray, or Custom

*Evergreen is not a stocked color. For lead times and minimum roll order requirements, contact Sika Roofing Customer Service.

Product Details

Product Information

Chemical Base

Same high quality ingredients used to manufacture Sarnafil roof membrane.

Shelf Life

N/A

Storage Conditions

N/A

Dimensions

Length: 10 ft (3.04 m)
Height: 1'' (25 mm)
Profile Width: 1/2'' (13 mm)
Base Width: 1-3/8'' (35 mm)
Weight: 1.93 lb (876 g)

Application

Application steps

SUBSTRATE PREPARATION

Welding area of the Sarnafil roof membrane to receive the Decor Profile shall be clean and dry.

APPLICATION

  1. Using a chalk line and removable chalk, mark out a line for laying the Decor Profile.
  2. Pre-assemble the Decor Profile sections, to create the required length, by inserting a provided connector into one end of a profile section then with the exposed portion of the connector into a second profile section butting the two sections together.
  3. Using a hand welder, hot-air weld the ends of adjoining Decor Profiles together.
  4. Align the Decor Profiles along the chalk line. Decor Profiles should generally line up with edge of Sarnafil roof membrane overlap. Do not cover overlap.
  5. If using the Sarnamatic® or Leister Uniroof automatic welding machine with the Decor Rib Profile kit, position machine to start the weld. Regularly check the Decor Profile guide. If hand welding, a 2" x 8'' (50 mm x 203 mm) nailer may be needed to keep Decor Profiles straight.
  6. Hand weld the Decor Profiles in areas where the automatic welding machine cannot be used. If required, heat weld a piece of Sarnafil roof membrane over the exposed end and trim to give a clean finish.

Documents