Product Data Sheet Safety Data Sheet Show all documents
Fastener CD-10

Fastener CD-10

Fastener CD-10 is a non-threaded hammer-in fastener

Fastener CD-10 is a non-threaded hammered in fastener used to attach Sarnafil® S 327 Membrane or Sikaplan® Fastened Membrane as well as Sarnatherm® insulation, Sarnatherm roof boards, gypsum roof boards, other Sika approved boards, and Sika approved accessories into structural concrete.

  • Diamond point allows easier installation and less chance of hole damage.
  • Split bulb exerts pressure on walls of hole, producing remarkable holding power.
Product Data Sheet Safety Data Sheet Show all documents

Usage

Used with various approved discs and plates for attachment direct to the concrete roof deck.    Areas of Application
  • New Roof Applications
  • Reroof Applications
  • Recover Applications
 

Advantages

  • Diamond point allows easier installation and less chance of hole damage.
  • Split bulb exerts pressure on walls of hole, producing remarkable holding power.

Packaging

LengthPackagingWeight
2" (51 mm)500 / Box13 lb (5.9 kg)
2-1/2" (64 mm)500 / Box16 lb (7.2 kg)
3" (76 mm)500 / Box18 lb (8.2 kg)
3-1/2" (89 mm)500 / Box21 lb (9.5 kg)
4" (102 mm)500 / Box23 lb (10.4 kg)
4-1/2" (114 mm)500 / Box25 lb (11.3 kg)
5" (127 mm)500 / Box28 lb (12.7 kg)
5-1/2" (140 mm)500 / Box31 lb (14.1 kg)
6" (152 mm)500 / Box33 lb (15.0 kg)
7" (178 mm)500 / Box38 lb (17.2 kg)
8" (203 mm)500 / Box44 lb (20.0 kg)
9" (229 mm)250 / Box25 lb (11.3 kg)
10" (254 mm)250 / Box28 lb (12.7 kg)
11" (279 mm)250 / Box31 lb (14.1 kg)
12" (305 mm)250 / Box33 lb (15.0 kg)

Colour

Black

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

  • Factory Mutual 4470
  • Miami-Dade County

 
Product Information

Chemical Base

Made from carbon steel, treated with a corrosion-resistant coating to meet the criteria for corrosion resistance.

Shelf Life

N/A

Storage Conditions

N/A

Dimensions

  • Shank Diameter: 0.215" (5.5 mm)
  • Head Diameter: 0.435" (11 mm)
  • Head Style: Flat

Application

Application steps

APPLICATION

Predrill a 7/32" (5.6 mm) hole using a carbide tip SDS or straight shank drill bit. Fastener CD-10 is then installed with a 2 lb (0.9 kg) short handle sledge hammer. Minimum fastener embedment into the deck is 1" (25.4 mm). The predrilled hole must be a minimum 1/2" (13 mm) deeper than fastener embedment.
Care must be taken to not damage the roof deck and should never penetrate the underside of the deck. Choose the correct fastener length and do not overdrive or underdrive the fastener. Pullout tests are required prior to job start for technical evaluation.

Documents