Product Data Sheet Show all documents

Sikaplan® Universal-60 Feltback EnergySmart

60 mil thick PVC thermoplastic membrane with felt backing

Sikaplan® Universal-60 Feltback EnergySmart Roof Membrane is a PVC thermoplastic membrane produced with a polyester scrim reinforcement and a 9 oz. recycled felt backing. Sikaplan® Universal-60 Feltback EnergySmart utilizes the Pro-Weld™ visual indicator to provide real-time feedback that the proper seam welding temperature and speed settings are being used during installation.

  • Highly reflective
  • Excellent tear strength resistance
  • Factory applied lacquer coating to reduce dirt pick up
  • Hot-air welded seams for long-term performance
  • Pro-WeldTM visual welding temperature indicator1
1 Available on White, Gray and Tan mebranes
Product Data Sheet Show all documents

Usage

Used in adhered and mechanically attached applications to approved substrates.    AREAS OF APPLICATION
  • Adhered roof systems
  • In-seam disc systems
  • In-seam batten, double-weld systems
  • RhinoBond® systems
  • New construction and reroofing
 

Advantages

  • Highly reflective
  • Excellent tear strength resistance
  • Factory applied lacquer coating to reduce dirt pick up
  • Hot-air welded seams for long-term performance
  • Pro-WeldTM visual welding temperature indicator1
1 Available on White, Gray and Tan mebranes

Packaging

60 mil (1.5 mm) Membrane 9oz. Feltback:

10 ft x 100 ft (3 m x 30 m) feltback roll, 388 lbs (176 kg) per roll, 9 rolls per pallet 

Colour

  • Top: White, Reflective Gray, and Tan
  • Bottom: Gray

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

  • FM Global
  • Underwriters Laboratories
  • Underwriters Laboratories of Canada
  • ICC Code Compliance – ESR 1157
  • Miami‐Dade County
  • Florida Building Code
  • California Title 24
  • LEED/Green Globes
 
Product Information

Chemical Base

Thermoplastic PVC membrane containing ultraviolet light stabilizers, flame retardant and polyester scrim reinforcement with a unique lacquer coating on the top surface.

Recycled Content

9% Pre‐consumer, 1% Post‐consumer

Reinforcing Material

Polyester

Shelf Life

N/A

Storage Conditions

Store rolls on pallets and fully protected from the weather with clean canvas tarpaulins. Unvented polyethylene tarpaulins are not accepted due to the accumulation of moisture beneath the tarpaulin in certain weather conditions that may affect the ease of membrane weldability.

Overall Thickness

60 mil (1.5 mm), nominal

45 mil

(ASTM D-751)

(ASTM Type III D-4434 Spec. Requirement)

Thickness Above Scrim

24 mil

16 mil

(ASTM D-7635)

(ASTM Type III D-4434 Spec. Requirement)

Felt Weight

9 oz/yd2
Technical Information

Resistance to Static Puncture

Pass

33 lbf (15 kg)

(ASTM D-5602)

(ASTM Type III D-4434 Spec. Requirement)

Resistance to Dynamic Puncture

Pass

14.7 ft-lbf (20 J)

(ASTM D-5635)

(ASTM Type III D-4434 Spec. Requirement)

Tensile Strength

303 lbf (1348 N)

200 lbf (890 N)

(ASTM D-751)

(ASTM Type III D-4434 Spec. Requirement)

Linear Dimensional Change

0.24%

0.5%

(ASTM D-1204)

(ASTM Type III D-4434 Spec. Requirement)

Tear Strength

45 lbf (200 N)

45 lbf (200 N)

(ASTM D-751)

(ASTM Type III D-4434 Spec. Requirement)

Seam Strength

Pass

75% of original1

(ASTM D-751)

(ASTM Type III D-4434 Spec. Requirement)

1 Failure occurs through membrane rupture not seam failure.

Retention of Properties after Heat Ageing

Breaking Strength, % of original: Pass

(ASTM D-751)

Elongation, % of original: Pass

(ASTM D-751)

Breaking Strength, % of original: 90

(ASTM Type III D-4434 Spec. Requirement)

Elongation, % of original: 90

(ASTM Type III D-4434 Spec. Requirement)

UV Exposure

Pass

5,000 hours

(ASTM G-154)

(ASTM Type III D-4434 Spec. Requirement)

Cracking

(7x magnification)

None

Crazing

(7x magnification)

None

Weight Change after Immersion in Water

2.5%

(ASTM D-570)

±3.0%

(ASTM Type III D-4434 Spec. Requirement)

Solar Reflectance

EnergySmart Colors

Initial Solar

Reflectance

3-Year Solar

Reflectance1

EnergySmart

White

0.860.722

EnergySmart

Reflective Gray

0.730.66

EnergySmart

Tan

0.720.65

1 Solar Reflectance testing according to ASTM C-1549

2 Solar Reflectance testing according to ASTM D-7897

Thermal Emittance

EnergySmart Colors

Initial Thermal

Emittance

3-Year Thermal

Emittance1

EnergySmart

White

0.910.912

EnergySmart

Reflective Gray

0.890.88

EnergySmart

Tan

0.890.88

1 Thermal Emittance testing according to ASTM C-1371, Slide Method

2 Solar Reflectance testing according to ASTM D-7897

Solar Reflectance Index

EnergySmart Colors

Initial Solar

Reflectance Index

3-Year Solar

Reflectance Index1

EnergySmart

White

108892

EnergySmart

Reflective Gray

9080

EnergySmart

Tan

8878

1 Solar Reflectance Index calculated according to ASTM E-1980

2 Solar Reflectance Index calculated according to ASTM D-7897

Low Temperature Bend

Pass

Pass ‐40°F (‐40°C)

(ASTM D-2136)

(ASTM Type III D-4434 Spec. Requirement)

Elongation at break

20 & 20% MD & CMD1

15 & 15% MD & CMD1

(ASTM D-751)

(ASTM Type III D-4434 Spec. Requirement)

1 MD = Machine Direction, CMD = Cross Machine Direction.

Application

Application steps

APPLICATION

Sikaplan® Universal-60 Feltback EnergySmart is installed on acceptable substrates and fastened to the roof deck using the approved attachment method. In adhered applications, the membrane is unrolled into approved Sikaplan or Sarnacol adhesive in accordance with Sika's technical requirements and then pressed into place with a minimum 75 lb (34 kg) steel roller. The membrane is heat‐welded together by trained mechanics using hot‐air welding equipment.

Documents