Accessories

Sikalastic®-600

Sikalastic®-600 is a single component, low viscosity, accelerating agent that enhances the moisture-triggered curing characteristics of Sikalastic® 600-series saturating resins for roofing and waterproofing applications.

Sika® Drainage Mat

Sika® Drainage Mat composites are available in both high flow dimpled core and high crush resistant geonet constructions. They perform a multi-faceted role by providing protection for RoofPro and Sikalastic®-320 NS/SL membranes as well as a means of collecting and conveying excess water in plaza decks, split slabs, planters, roof gardens and other roofing and waterproofing applications.

  

Sika® Drainage Mat 420 and 720

Sika® Drainage Mat 420 and 720 consist of an impermeable high flow dimpled polypropylene drainage core heat-bonded to a layer of non-woven polypropylene (420) or woven polypropylene (720) filter fabric on the top side and a polyethylene membrane protection film on the bottom side. The filter fabric retains soil or sand particles as well as freshly placed concrete or grout, allowing filtered water to pass into the drainage core. Use the nonwoven filter fabric with soil, sand or stone ballast; use the woven filter fabric with freshly placed concrete or grout.

  

Sika® Drainage Mat 1000
Sika® Drainage Mat 1000 consists of a high density polyethylene geonet drainage core with its ridges heat fused to a layer of nonwoven polypropylene filter fabric on the top side and a heavy duty non-woven polypropylene membrane protection fabric on the bottom side. The filter fabric retains soil or sand particles as well as freshly placed concrete or grout, allowing filtered water to pass through to the core. The bottom protection fabric provides cushioning for the waterproofing membrane. The geonet core is highly crush resistant yet flexible enough to conform to irregular surfaces. Sika Drainage Mat 1000 is suitable for heavy loads and split slabs exposed to vehicular traffic.

  

Sika® Drainage Mat GRS
Sika® Drainage Mat GRS for vegetated roof assemblies consists of an impermeable dimpled polystyrene drainage core. The core is perforated, then bonded to a root resistant non-woven polypropylene filter fabric on the top side and nonwoven polypropylene membrane protection fabric on the bottom side. The filter fabric helps prevent roots from affecting the efficiency of the drainage/aeration layer as well as retaining soil or other fine particles from being washed away and allows water to pass into the drainage core. The bottom protection fabric provides cushioning for the waterproofing membrane. The core is installed dimpled side down to allow water retention within the cups. Excess water is collected and conveyed to a proper collection system, helping to control drainage flow.

Wall Grip Coping

Wall Grip Coping is a metal coping with hold down cleats and metal drain chairs for capping most any parapet. Wall Grip Coping is used with either an adhered or mechanically attached Sika Sarnafil Roof System to secure and protect membrane flashings.